10AN Extended Turbo Oil Return Adaptor for FC RX7 13B
10AN turbo oil return adaptor to suit the front cover on Mazda FC RX7 13B (Series 4 & 5), and also Cosmo engines. Extended length to allow ea...
View full details10AN turbo oil return adaptor to suit the front cover on Mazda FC RX7 13B (Series 4 & 5), and also Cosmo engines. Extended length to allow ea...
View full details10AN turbo oil return adaptor to suit the front cover on Mazda FD RX7 13B (Series 6) engines. Extended length to allow easier connection of oil r...
View full detailsMazda 12A, early 13B & FC-FD or 20B engines. Complete O-ring Kit for all engine rebuilds. Superior grade over OEM, which are re-usable upon ins...
View full detailsPower Seals side seals for Mazda 13B & 20B engines from (86-01'). Unbreakable non-genuine side seals. Side Seals are superior made with increa...
View full detailsAluminium bush to fit 17mm bore aftermarket pulleys to 15mm shaft size alternators. 15mm inside diameter 17mm outside diameter 5.5mm long CNC mach...
View full detailsThis connector kit is compatible with the following products: FT500LITE/500 Auxiliary FT400 Auxiliary
Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...
View full details16AN to M34X1.5 adaptor with o-ring seal, to suit our Mazda 12A & 13B electric waterpump adaptors. Price is per one fitting.
20AN to M34X1.5 adaptor with o-ring seal, to suit our Mazda 12A & 13B electric waterpump adaptors. Price is per one fitting.
Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...
View full detailsThis connector kit is compatible with the following products: FT500LITE/500 Main FT400 Main FT350 FT300 FT250 GearController BoostController2 PRO2...
View full detailsPerfect all round microfibre cloths to suit all your automotive & housing needs.We personally use these on a day to day basis for washing, dryi...
View full detailsPerfect all round microfibre cloths to suit all your automotive & housing needs.We personally use these on a day to day basis for washing, dryi...
View full detailsDescription Use with FT600 / FT550 / FT500 / FT500LITE / FT450 integrated boost controller. Pressure Input: 1/8" NPT Output to Wastegate: 1/...
View full details32mm tube to M34X1.5 adaptor with o-ring seal, to suit our Mazda 12A & 13B electric waterpump adaptors. Price is per one fitting.
Whether you're building your own harness or modifying an existing one, this CPC connector kit will make it easy for you to pass wires through your ...
View full details38mm tube to M34X1.5 adaptor with o-ring seal, to suit our Mazda 12A & 13B electric waterpump adaptors. Compatible with both 2-bolt & 3-bo...
View full details4x WB-O2 Nano Harness. Install 4 Nanos with ease! Available in 2 lengths: 6.5ft (2m) or 3ft (1m)
Add these injector boots to your custom harness to protect the wiring and for a clean installation. *Injector connector not included.
The new FuelTech Air/Liquid Thermocouple offers accurate temperature reading for oil, coolant and intake air.Temperature range: 32°F to 2200°FWire ...
View full detailsGM style intake air temperature sensor. Standard IAT sensor for all FuelTech ECUs. Thread size: 3/8" NPT
Alcohol O2 - Dual Channel harness.Harness comes pre-wired for 2 O2 Sensors Length: 8ft
Description Downloads For use with the lab grade NTK sensors. If you do not have that specific sensor then check out our WB-O2 Nano. CAN commun...
View full details