FuelTech

Use this kit when building a custom harness while using injectors with EV1 connectors and protect wiring for a clean installation. Kit Includes: EV...

Use this kit when building a custom harness while using injectors with EV6/EV14 connectors. Kit Includes: EV6/EV14 injector connector, (2) terminal...

Use this kit when building a custom harness while using injectors with Nippon Denso connectors. Kit Includes: Nippon Denso injector connector, (2) ...

This adapter is used when using our Alcohol wideband O2 conditioner with a Bosch O2 sensor. This adapter is designed for converting one of our pr...

This adapter is used when running our Alcohol O2 module with our PRO500 or PRO600 harness. It will convert the Bosch O2 connector to the NTK sen...

FuelTech's billet remote pressure sensor mounting block is the perfect solution to mount your pressure sensors in one common place, Each port is in...

FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 ...

Description The FuelTech spark plug gapper is recommended for the adjustment of the distance between the center and ground electrodes. Descri...

Grip features a 1-7/32-inches/32mm diameter 13-inches/365mm Overall diameter Deep-dish design with 1-3/8-inches/35mm distance from the mounting sur...

Nylon hose for MAP Sensor - 6ft 4mm ID for vacuum/pressure hose To use with any FuelTech ECU or FuelTech BoostController

Replaces the stock “H” G-Force long levers. Use with FuelTech GearController or FT600 to allow gear change at full load without clutch, in non-clut...

Description Downloads Designed to use with FuelTech GearController* to perform powershifts. Detects knob deformation to cut the ignition H-pa...

Bracket kit designed to mount (4) FuelTech CDI Racing Ignition Coils Made from lightweight billet aluminum, only 13.1 oz Includes (4) 1/4” socket ...

Simplify installation of your FTSPARK with our chassis mounting bracket. Available sizes: 1.375", 1.500" and 1.625"

Perfect mounting solution for your FT350/FT400/FT500 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT450 & FT550 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT600 ECU. Modifications are required to fit specific vehicle. Panels do not come trimmed down or with a carbon ...

Simplify installation of your FT600 with this weld-on mounting kit.