turbo-spec.com

Description Downloads 4 channel low impedance injectors driver unit.  Peak and Hold Manual Features Current control driver for low impedanc...

Description Downloads 4 channel low impedance injectors driver unit.  Peak and Hold Manual Features Current control driver for low impedanc...

Description Downloads 4 channel low impedance injectors driver unit.  Peak and Hold Manual Features Current control driver for low impedanc...

Peak & Hold harness.Compatible with all current versionsNo of ways: 10 Length: 2m (6.5 ft) 

Peak and Hold Jumpers are required when using any complete FT harness with high impedance injectors. (1 per 4 injectors).

Plastic oil cap to suit our billet aluminium filler necks, weld on bosses and factory Mazda Rotary engines, other than RX8 after March 2008....

Description Downloads The FuelTech PRO550 V8 plug and play harness is the best link between your FT550 or FT550LITE ECU and V8 engine.   PRO550...

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

This connector kit is used with the PRO550 & PRO600 V8 Complete Harness to utilize extra inputs or outputs.

The FuelTech PRO550/600 FTSpark-1 harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expansio...

The FuelTech PRO550/600 FTSpark-8 harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expansio...

The FuelTech PRO550/600 Smart Coil harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expan...

This connector kit is used with the PRO600 V8 Complete Harness to utilize extra inputs.

Description Downloads The FuelTech PRO600 V8 plug and play harness is the best link between your FT600 ECU and V8 engine. It comes pre-terminate...

The FuelTech PRO600 Secondary Injector harness is designed as a true plug and play expansion to complement the PRO600 V8 harness. With this expansi...

Description Downloads The FuelTech PROBIKE A Harness is a terminated harness to be used with a FT450 or FT550 ECU. Designed for 4-cylinder spor...

This connector kit is used with the PROBIKE B Expansion Harness to utilize extra inputs or outputs.

Description Downloads FuelTech PROBIKE B Expansion Harness is a terminated expansion harness to be used with an FT550 ECU and a PROBIKE A Harnes...

Fits PS-10B pressure sensor & Precision Turbo shaft speed sensor. PS-10B pinout: 1 - Signal 2 - Ground 3 - 12V Precision Turbo shaft speed se...

Typically used to monitor fuel, oil, and wastegate pressure. *Not compatible with PRO500/PRO600 or other complete FuelTech engine harnesses. Use PS...

Description Typically used to monitor fuel, oil, and wastegate pressure. TECHNICAL DESCRIPTION Output: 0.5-4.5V Supply: 5V Range: 0-150 psi ...