Filters
FuelTech
-
$130.00 -
Save $-515.00
$515.00| / -
Save $-515.00
$515.00| / -
Save $-580.00
$580.00| / -
Save $-640.00
$640.00| / -
Save $-930.00
$930.00| / -
Save $-40.00
Turbo-Spec.comPeak & Hold Harness
$40.00| /Peak & Hold harness.Compatible with all current versionsNo of ways: 10 Length: 2m (6.5 ft)
$40.00| / -
Save $-300.00
Turbo-Spec.comFT400 Dyno Extension - Auxiliary Harness
$300.00| /FT400 dyno extension auxiliary harness.Used on dynamometers. Has male and female plugsNo of ways: 16 Length: 13ft
$300.00| / -
Save $-130.00
Turbo-Spec.comFT400 Unterminated Reduced Auxiliary Harness
$130.00| /FT400 reduced auxiliary harness. Used on cars that do not need any other functions from the auxiliary harness. Black/White: Power ground White Inp...
View full details$130.00| / -
Sale
Turbo-Spec.comFT400 Unterminated Auxiliary Harness
from $195.00| /FT400 unterminated auxiliary harness.No of ways: 16 Available in 10ft and 20ft lengths.
from $195.00| / -
Save $-410.00
Turbo-Spec.comFT250/300/350/400 Dyno Extension - Main Harness
$410.00| /Used to extend main harness on dynamometers. Has male and female plugs.No of ways: 24 Length: 13ft
$410.00| / -
Sale
Turbo-Spec.comFT250/300/350/400 Unterminated Main Harness
from $260.00| /FT200, FT250, FT300, FT350 and FT400 main harness Used on rear engine vehicles No of ways: 24
from $260.00| / -
Sale
Turbo-Spec.comFT450/550 A Unterminated Harness
from $425.00| /Unterminated harness for FT450/550 A connector.
from $425.00| / -
Save $-600.00
Turbo-Spec.comFT500 Dyno Extension Harness
$600.00| /Used on dynamometers to extend existing FT500 harness.
$600.00| / -
Sale
from $600.00| / -
Sale
Turbo-Spec.comFT550 Unterminated Harness
from $425.00| /Unterminated harness for FT550: A & B Harnesses - Both of these harnesses are required. B Harness - Ordered by itself only if upgrading from F...
View full detailsfrom $425.00| / -
Sale
Turbo-Spec.comFT600 Unterminated Harness
from $1,065.00| /Description FT600 unterminated harness. Features FT600 unterminated harness is used when wiring everything from scratch. This harness consist...
View full detailsfrom $1,065.00| / -
Save $-300.00
Turbo-Spec.comWB-O2 Sensor NTK to Bosch Adapter Harness
$300.00| /This adapter is used when using our Alcohol wideband O2 conditioner with a Bosch O2 sensor. This adapter is designed for converting one of our pr...
View full details$300.00| / -
Save $-70.00
Turbo-Spec.comCAN Tee Harness
$70.00| /Compatible with FT600, FT550, FT500, FT500LITE, FT450, FT400, FT350, BoostController2 and GearController Two male and one female plugs Length: 1m ...
View full details$70.00| / -
Save $-20.00
Turbo-Spec.comPeak & Hold Jumper Harness
$20.00| /Peak and Hold Jumpers are required when using any complete FT harness with high impedance injectors. (1 per 4 injectors).
$20.00| / -
Save $-350.00
Turbo-Spec.comWB-O2 Sensor Bosch to NTK Adapter Harness
$350.00| /This adapter is used when running our Alcohol O2 module with our PRO500 or PRO600 harness. It will convert the Bosch O2 connector to the NTK sen...
View full details$350.00| / -
Save $-515.00
Turbo-Spec.comWB-O2 Nano to Alcohol O2 Adapter Harness
$515.00| /This adapter is required when using our Alcohol O2 module with our PRO500 or PRO600 harness. It will adapt the dual Nano connectors to a single d...
View full details$515.00| / -
Save $-285.00
Turbo-Spec.comFT350 to FT450 Adapter Harness
$285.00| /Description Downloads FT350 to FT450 adapter harness FT350 to FT450 Adapter Harness Manual FEATURES FT250/FT300/FT350 to FT450 plug and pl...
View full details$285.00| / -
Save $-410.00
Turbo-Spec.comFT350 to FT450 Adapter Harness w/ Nano
$410.00| /Description Downloads FT350 to FT450 adapter harness FT350 to FT450 Adapter Harness w/Nano Manual
$410.00| /