FuelTech

Description The FuelTech spark plug gapper is recommended for the adjustment of the distance between the center and ground electrodes. Descri...

Grip features a 1-7/32-inches/32mm diameter 13-inches/365mm Overall diameter Deep-dish design with 1-3/8-inches/35mm distance from the mounting sur...

Nylon hose for MAP Sensor - 6ft 4mm ID for vacuum/pressure hose To use with any FuelTech ECU or FuelTech BoostController

Replaces the stock “H” G-Force long levers. Use with FuelTech GearController or FT600 to allow gear change at full load without clutch, in non-clut...

Description Downloads Designed to use with FuelTech GearController* to perform powershifts. Detects knob deformation to cut the ignition H-pa...

Bracket kit designed to mount (4) FuelTech CDI Racing Ignition Coils Made from lightweight billet aluminum, only 13.1 oz Includes (4) 1/4” socket ...

Simplify installation of your FTSPARK with our chassis mounting bracket. Available sizes: 1.375", 1.500" and 1.625"

Perfect mounting solution for your FT350/FT400/FT500 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT450 & FT550 ECU. Modifications are required to fit specific vehicle. Approximate Dimensions: 18" x 12"

Perfect mounting solution for your FT600 ECU. Modifications are required to fit specific vehicle. Panels do not come trimmed down or with a carbon ...

Simplify installation of your FT600 with this weld-on mounting kit.

Smart Clip bracket and mounting hardware for the following products: FT250/FT300/FT350/FT400/FT500LITE/FT500 GearController BoostController2

Simplify installation of your FT500 with this steering column mounting bracket. Size: 1.250"

Simplify installation of your FT450 or FT550 with this steering column mounting bracket. Size: 1.250"

Simplify installation of your FT600 with this steering column mounting bracket. Size: 1.250"

Automotive relay holder for 4 or 5 pin Mini ISO relays (Regular 40A relays) Perfect relay connector to use with the 40A relay with built in fuse (h...

High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness. One relay required per item being w...

Use this Sealed Relay Holder Kit to make installation easier when using a Sealed Relay. Comes with (2) 10-12 GA / (2) 18-20 GA terminals.

Use this Sealed Relay Holder to make installation easier when using a Sealed Relay.

High quality sealed relay which is typically used for ECU, injectors, and coils when building your own harness. One relay required per item being w...

Description Downloads This solid state relay is required when running dual solenoid / big stages of nitrous. One relay required per nitrous sta...

Downloads  Staging / Brake Control Relay Diagram Features This relay can be used for the following: FT600 / FT550 / FT500 / FT500LITE / FT45...

Downloads  FT Dual Power Driver Manual The FT Dual Power Driver is a current amplifier that allows using the ECU outputs to activate electrica...

This adapter harness is used to connect the CAN bus data stream from your FuelTech ECU to the Racepak IQ3S (Street Dash), IQ3D (Drag Dash) or Racep...